Appendices Polycold Cryochiller
Appendix I: Disconnect, Packing, and Shipping Instructions Installation and Operation Manual
Brooks Automation
12-20
214072 Revision B
8. When the transducers are at equilibrium and hold a steady value, take a pressure reading. This is
the Balance Pressure.
Appendix I: Disconnect, Packing, and Shipping Instructions
If the Polycold Cryochiller is to be shipped, it must be properly packaged to ensure it arrives undam-
aged.
NOTE: The original shipping crates or equivalent must be used when shipping the Cryochiller. If
the original crates are lost or damaged, contact Brooks Automation for replacements.
Electrical Hazard
Contact with energized equipment can cause electric shock and
result in death or serious injury.
Avoid contact with electrical circuits.
Disconnect electric energy before disassembling electric service.
NOTICE
Refrigerant removal or charging must be performed by Brooks Service personnel
or Brooks authorized service providers.
Customers must never attempt to add or remove refrigerant from the system.
Item Description
Electrical Category Type 2 - Equipment is energized. Energized circuits are cov-
ered or insulated.
840164-XX Shipping Kit
XX designates the kit version for the Polycold Cryochiller
Tools and materials: Standard tool kit and refrigerant line tools.
Moisture, Shock, and Tip indicators as required
To Next Page
Loading...