Polycold Cryochiller
Installation and Operation Manual
Brooks Automation
214072 Revision B 4-1
4 Installation
This chapter assumes that the user has completed the specification, design, and component selection
process. Refer to the Introduction and Specification chapters for design and specification information.
When using this chapter. follow the recommendations below.
• Read and become familiar with the Safety chapter.
• Read the Specifications chapter and ensure the site and system components are suitable for
the installation location.
• Read this chapter and be familiar with the steps required to install the unit.
• Be aware of all Safety issues associated with the materials and refrigerants contained in the
Polycold Cryochiller.
• Read the section titled “Installation Considerations” and decide on how each of these issues
will be handled.
• Confirm the availability of certified refrigeration specialists that may be required for some pro-
cedures.
• Arrange for a qualified electrician or electrical installer to perform electrical power installation.
• Follow the Installation Checklist to guide you through the installation.
General Hazard
Failure to review the Safety section and follow the safety warnings
can result in death or serious injury.
• Do not attempt to perform installation, operation, or maintenance
procedures on the Polycold Cryochiller until you have read and
understand the information in the Safety chapter.
• Read and understand each procedure before performing the
procedure.
To Next Page
Loading...
