Polycold Cryochiller Appendices
Installation and Operation Manual Appendix J: Material Safety Data Sheets - MSDS
Brooks Automation
214072 Revision B
12-29
MSDS - POE Solest Oil LT-32
Material Safety Data Sheet
SOLEST LT-32
Prepared according to 29CFR 1910.1200.
1 Chemical Product and Company Identification
The Lubrizol Corporation
29400 Lakeland Boulevard
Wickliffe, Ohio 44092
Tel: (440) 943-4200
Product Trade Name SOLEST LT-32
CAS Number Not applicable for mixtures.
Synonyms None.
Generic Chemical Name Mixture.
Product Type Multipurpose.
Preparation/Revision Date 04 May 2011
Transportation Emergency Phone
No.
FOR TRANSPORT EMERGENCY call CHEMTREC: (+1) 703-527-3887 (outside the U.S.), 1-800-424-9300 (in the
U.S.)
MSDS No. 3862567-2301925-5036121-102103
2 Hazards Identification
Appearance Clear to yellow liquid.
Odor Mild
Principal Hazards Caution.
z
May cause skin irritation.
See Section 11 for complete health hazard information.
3 Composition/Information on Ingredients
Hazardous Ingredients
This material contains no ingredients requiring disclosure under regulatory hazard criteria for this jurisdiction. See Section 11
for additional details.
4 First Aid Measures
Eyes Flush with water at least 30 minutes. Get medical attention if eye irritation develops or persists.
Skin Wash with soap and water. Remove contaminated clothing. If skin irritation occurs, get medical attention. Launder
contaminated clothing before reuse.
Inhalation Remove exposed person to fresh air if adverse effects are observed.
Oral DO NOT INDUCE VOMITING. Get immediate medical attention.
Additional Information Note to physician: Treat symptomatically.
5 Fire Fighting Measures
Flash Point 246 C, 475 F COC (Typical)
Extinguishing Media CO2, dry chemical, or foam. Water can be used to cool and protect exposed material.
Firefighting Procedures Recommend wearing self-contained breathing apparatus. Water may cause frothing. Use water to cool containers exposed
to fire.
Unusual Fire & Explosion Hazards See section 10 for additional information.
6 Accidental Release Measures
Spill Procedures Personal Protective Equipment must be worn, see Personal Protection Section for PPE recommendations. Ventilate area if
SOLEST LT-32
MATERIAL SAFETY DATA SHEET
To Next Page
Loading...
