Brooks Polycold MaxCool 2500L - Packing Procedure; Appendix J: Material Safety Data Sheets - MSDS

Polycold Cryochiller Appendices
Installation and Operation Manual Appendix J: Material Safety Data Sheets - MSDS
Brooks Automation
214072 Revision B
12-21
Packing Procedure
1. Evacuate the refrigerant from the refrigerant lines and cryosurface by performing the
Zero Line Loss procedure. See Appendix G: Zero Line Loss Procedure on page 12-13
2. Carefully disconnect the cryosurface, refrigerant lines, and thermocouples and package them for
shipment.
3. Disconnect all external wiring and facilities connections.
4. Lock down the compressor to the frame by installing the double lock-down nuts on each of the (4)
compressor bolts.
5. Secure all panels firmly in place with shrink wrap or similar product.
6. Firmly secure the Polycold Cryochiller to a shipping pallet and cover with a cardboard enclosure.
7. Add shipping indicators, if required.
Appendix J: Material Safety Data Sheets - MSDS
Document 825086-00 provides the MSDS information for the blends of refrigerant gas.
Document 825103-00 provides the MSDS information for the compressor oil.