Brooks Polycold MaxCool 2500L - Comp_Dischrg_Temp; Compressor Discharge Temp; Comp_Line_Temp; Compressor Liquid Line Temperature

Host Commands Polycold Cryochiller
Compressor Sensor Readings Installation and Operation Manual
Brooks Automation
7-30 214072 Revision B
COMP_DISCHRG_TEMP Compressor Discharge Temp
COMP_LINE_TEMP Compressor Liquid Line Temperature
COMP_SUCT_PRESS Compressor Suction Pressure
Purpose: Read the compressor discharge temperature sensor value. (TC1)
Parameter(s): [n],?
[n] is
0 = Refrigerant compressor
1 = Not Used
Return Value: [A][nnn.n]
Default Value: N/A
Security Level Get: 1 Set: N/A
Example: “COMP_DISCHRG_TEMP,0,?”
Interface RS-232, Ethernet
Purpose: Read the compressor liquid line temperature sensor value. (TC2)
Parameter(s): [n],?
[n] is
0 = Refrigerant compressor
1 = Not Used
Return Value: [A][nnn.n]
Default Value: N/A
Security Level Get: 1 Set: N/A
Example: “COMP_LINE_TEMP,0,?”
Interface RS-232, Ethernet
Purpose: Read the compressor suction pressure sensor value.
Parameter(s): [n],?
[n] is
0 = Refrigerant compressor
1 = Not Used
Return Value: [A][nnn.n]
Default Value: N/A