Brother DP-525CJ - 5.3.3.2. Removing the Release Lever and Release Shaft; Fig. 4.26 Removing the Release Lever and Release Shaft from the PF Base Assembly

REPAIR
Mechanical
SERVICE MANUAL
4-34
5.3.3.2. Removing the Release Lever and Release Shaft
(1) Remove the release spring.
(2) After disengaging the release shaft from the PF base assembly by lightly pushing
the leaf spring, slide the release shaft in the thrust direction and align the recess in
the release shaft with the cutout in the PF base assembly. Remove the release
shaft from the PF base assembly.
(3) Turn the release lever clockwise and remove it from the PF base assembly.
Fig. 4.26 Removing the Release Lever and Release Shaft from the PF Base Assembly