Brother DP-525CJ - 5.3.3.3. Removing the ACF Shaft Assembly; Fig. 4.27 Removing the ACF Shaft Assembly

REPAIR
SERVICE MANUAL
Mechanical
4-35
5.3.3.3. Removing the ACF Shaft Assembly
(1) Remove the locker spring.
(2) Turn the ACF shaft locker clockwise and remove it from the PF base assembly.
(3) After disengaging the ACF shaft assembly from the PF base assembly by lightly
pushing the leaf spring, slide the ACF shaft assembly in the thrust direction and
align the recess in the ACF shaft assembly with the cutout in the PF base
assembly. Remove the ACF shaft assembly from the PF base assembly.
Fig. 4.27 Removing the ACF Shaft Assembly