VI-19
J-1a Paper pick-up block (Pick miss)
Possible cause Step Check Result Remedy
Adjustment
lever
(spring pressure
switching lever)
1 Is the position of the adjustment lever of the
cassette corresponding to the paper sheet
size?
No Instruct the user to follow
the correct method.
Print paper 2 Is a recommended type of paper being used? No Instruct the user to use
recommended type of
paper.
3 Is the print paper deformed, curled or wavy? Yes Replace the print paper.
Instruct the user how to
storage.
Maximum
paper load on
the cassette
4 Does the amount of paper loaded on the
cassette exceed the specified maximum paper
load?
Yes Instruct the user not to
load more than the
maximum amount of
paper.
Pick-up rollers 5 Are the pick-up rollers defomed or worn? Yes Replace the pick-up
rollers.
Separation pad 6 Is the separation pad deformed or worn, or is it
detached?
Yes Replace the pad assy.
For solenoid activation, no feeder motor operation and no regist sensor activation, refer to
the item NO PAPER PICK-UP FROM THE CASSETTE in the column MALFUNCTIONS.
J-1b Paper pick-up block (Oblique feed jam)
Possible cause Step Check Result Remedy
Adjustment
lever
(spring pressure
switching lever)
1 Is the position of the adjustment lever of the
cassette corresponding to the paper sheet
size?
No Instruct the user to follow
the correct method.
Paper front
guide
2 Is the paper front guide set in the correct
position?
No Set the paper front guide.
MP-feeding
paper sheet
3 Are paper sheets set along the left wall? No Instruct the user to set
paper sheets correctly?
Cassette-feeding
sheet guide.
Cassette rear,
side guide
4 Is the cassette rear side guide set correctly? No Instruct the user to set it
correctly?
MP-feeding
paper sheet
MP sheet guide
Is the MP sheet guide set correctly? No Instruct the user to set it
correctly?
To Next Page
Loading...
