VII-18
HP LaserJet 4 compatible
This is chosen by default.
HP LaserJet 3 compatible
Print a blank page
Set number of re-trying of paper
feeding. The number can be
select in the range from 0 to 7.
2 is chosen by default.
TowerFeed is not attached.
This is chosen by default.
TowerFeed is attached.
This is chosen by default.
This setting effects PS calculation.
This is chosen by default.
TRAY COMMAND MODE
TRAY COM. =NORM
TRAY COM. =SPEC.
PRINT BLANK PAGE
PICKUP RETRY =2
PICKUP RETRY SET
TowerFeed ON/OFF
TowerFeed=OFF
TowerFeed=ON
FONT SELECT
PAPER&TRAY SIZE
PARALLEL MENU
RS-232C MENU
REPRINT ON/OFF
ROM DATE DISPLAY
AUTO HRC ON/OFF
APPLETALK AT/PS
PS BINARY SELECT
PS QUOTE BINARY
PS IMAGE MASK
PS CEIL=FLOOR
PS CEIL=CEIL
PS CEIL MODE
STATUS ECHO=ON
STATUS ECHO=OFF
PS STATUS ECHO
BOISE ID MODE
To Next Page
Loading...
