Brother HL-2060 - Page 132

VII-19
Carry out the page protect if it is
turned OFF.
This is chosen by default.
Reset a printer with ESC E.
This is chosen by default.
Carry out form feed with ESC E.
This is chosen by default.
Not eject paper if both the 1
st
and 2
nd
faces are blank.
This is chosen by default.
When the total memory is 2MB, 300
dpi is automatically selected in PS for
less memory full.
Use 300 dpi only in PS.
This setting delays paper jam error
detection.
This is chosen by default.
This is chosen by default.
1 page is fixed for the copy page
number.
Settings made on the panel are
reset job by job.
This is chosen by default.
Turn ON USB function.
This is chosen by default.
Turn OFF USB function.
PRO.OFF=AUTO
PRO.OFF=NORMAL
PROTECT OFF MODE
HP ESC E=RESET
HP ESC E =F/F
HP ESC E COMMAND
DPX FF SUP. =NORMAL
DPX FF SUP. =SPEC.
DPX FF SUP. MODE
PS300RESO =IF 2M
PS300RESO =NO
PS300RESO
PS300RESO =FORCE
JAM CHECK=TIGHT
JAM CHECK=LOOSE
JAM CHECK LEVEL
COPY PAGES=ON
COPY PAGES=OFF
COPY PAGES
RESET=JOB
RESET=NORMAL
PANEL RESET MODE
USB=ENABLE
USB=DISABLE
USB SETTING