IV-26
(8) Loosen a screw and remove the Fixing PCB ASSY.
Figure 4.53
(9) Release the left hook and take off the Paper delivery actuator.
Figure 4.54
(10)
1) Remove the retaining rings (on both sides).
2) Remove the HR gear, loosen the screw and remove the spring washer, remove
the left and right HR bearings and the heat roller by sliding it.
Figure 4.55
Screw
Fixing PCB ASSY
Connector (2P)
Paper delivery
actuator
Fixing unit cover
Thermistor
Screw
Retaining
rin
To Next Page
Loading...
