- IV-14 -
2.2.8 Cover ASSY front IN
Note:
In the following process, do not separate the cover ASSY front IN and link: R too far.
1) Release latch A and open the chute ASSY IN together with the chute ASSY out.
2) Remove 2 screws securing the cover ASSY front IN to the chute ASSY IN.
3) Pull out the cover ASSY front IN slightly from the chute ASSY IN.
4) Remove the top link: R from the leaf spring at the back of the cover ASSY front IN
and remove the cover ASSY front IN.
Fig.4-27
Fig.4-28
Cover ASSY front IN
Cover ASSY front IN
Link lever R
Top view
Screw, M3x10
To Next Page
Loading...
