Brother HL-4200CN - S-Hvps

- IV-52 -
2.4.7 PWBA EEPROM
1) Remove 1 screw securing the PWBA EEPROM.
2) Remove the PWBA EEPROM from the printer.
Fig.4-93
2.4.8 S-HVPS
1) Remove 4 screws securing the S-HVPS.
2) Remove the S-HVPS from the printer.
Fig.4-94
PWBA EEPROM
Left
Left
S-HVPS
Screw, M3x6
Screw, M3x6
Screw, M3x6
Screw,
M3x6