Brother HL-4200CN - Clutch ASSY Turn; Solenoid Feed

- IV-74 -
2.6.10 Solenoid feed
1) Remove 1 screw securing the solenoid feed from the pickup ASSY.
2) Separate the solenoid feed a little from the pickup ASSY and shift the harness of
the solenoid feed.
3) Remove the connector of the solenoid feed from the pickup ASSY.
Fig.4-129
2.6.11 Clutch ASSY turn
1) Release the hook securing the stopper clutch to the shaft on the right side shaft of
the pickup ASSY.
2) Pull out the stopper clutch from the shaft of pickup ASSY.
3) Remove the connector of the clutch ASSY turn from the pickup ASSY.
4) Pull out the clutch ASSY turn from the shaft.
Fig.4-130
Solenoid feed
Rear
Right
Clutch ASSY turn
Stopper clutch
Rear
Right