Brother HL-4200CN - Lever Drum: R

To Next Page

To Previous Page

- IV-60 -

2.5.8 Lever drum: R

1) Remove 4 screws securing the plate ASSY lever R from the right side of the printer.

2) Remove the plate ASSY lever R from the printer.

3) Release the hook of the spring lever 30N hitched over the convex portion of the 4

lever drum: R from the right side of the printer.

Fig.4-107

4) Remove the link lever: R from the printer together with the spring lever 30N.

5) Remove the lever drum: R from the printer.

Fig.4-108

Spring lever 30N

Plate ASSY lever R

Gear IDL. press

Gear press R

Link lever: R

Lever drum: R

Screw, M3x10

Other manuals for Brother HL-4200CN