V-90
<Whole image has bluish tinge>
Fig.5-32
Condition:
Whole image has bluish tinge.
Initial check:
Parts of different specifications, improper installation, damage, deformation, dirt, foreign
substance attached, etc.
Major parts to be checked:
Transfer roll cartridge ASSY
Item Check Remedy
1
Paper check
The recommended size/type of paper is used?
Change paper.
Use the recommended
size/type of paper.
Check the printer driver.
2
The flakes appear on the recommended size/type
of paper.
Or the flakes appear on the paper other than
recommended size/type of paper.
Adjust transfer roll
cartridge tertiary
transfer current value
(Refer to Trouble
shooting 6. adjusting
transfer roll cartridge
tertiary transfer current
value in Chapter 5).
To Next Page
Loading...
