7 - 5 QUICK-DIAL NUMBERS AND DIALLING OPTIONS
Dialling options
Access codes and credit card numbers
Sometimes you may want to choose from several long distance
carriers when you make a call. Rates may vary depending on the time
and destination. To take advantage of low rates, you can store the
access codes or long-distance carriers and credit card numbers as
Speed-Dial numbers. You can store these long dialling sequences by
dividing them and setting them up on separate keys in any
combination. You can even include manual dialling using the dial pad.
The combined number will be dialled in the order that you entered it
as soon as you press
Mono Start
or
Colour Start
.
(See Storing Speed-Dial numbers on page 7-1.)
For example, you can store ‘555’ on Speed-Dial #03 and ‘7000’ on
Speed-Dial #02. If you press
Search/Speed Dial
,
#03
,
Search/Speed Dial
,
#02
, and
Mono Start
or
Colour Start
, you
will dial ‘555-7000’.
To temporarily change a number, you can substitute part of the
number with manual dialling using the dial pad.
For example, to change the number to 555-7001 you could press
Search/Speed Dial
,
#03
and then press
7001
using the dialling
pad.
There are three ways to dial. (See
How to dial
on page 6-1
.)
If you must wait for another dial tone or signal at any point in the
dialling sequence, store a pause there in the number by
pressing
Redial/Pause
. Each key press adds a 3.5-second
delay.
To Next Page
Loading...
Need help?
General
