Brother MFC-3420C User Manual

SETUP SEND 6 - 3
Faxing from the automatic document feeder (ADF)
Faxing from the ADF
1
If it is not illuminated in green, press (
Fax
).
2
Load your document. (See
Load documents
on page 2-1.)
3
Dial the fax number.
Press
Mono Start
or
Colour Start
. The machine starts
scanning the first page.
Faxing from the scanner glass
You can use the scanner glass to fax pages of a book or one page
at a time. The documents can be up to A4 size. To cancel, press
Stop/Exit
.
1
If it is not illuminated in green, press (
Fax
).
2
Load your document on the scanner glass. (See Using the
scanner glass on page 2-3.)
3
Dial the fax number.
Press
Mono Start
or
Colour Start
.
The machine starts scanning the first page.
If you press
Colour Start
, the machine starts sending.
4
To send a single page, press
2
(or
press
Mono Start
again).
The machine starts sending the
document.
—OR—
To send more than one page, press
1
and go to Step 5.
5
Place the next page on the scanner
glass.
Press
Menu/Set
.
The machine starts scanning. (Repeat Steps 4 and 5 for each
additional page.)
■
If the memory is full and you are faxing a single page, it will
be sent in real time.
■
If you need to cancel before the fax is sent, press
Stop/Exit
.
You cannot send multiple pages for colour faxes.
Next Page?
1.Yes 2.No(Dial)
Set Next Page
Then Press Set

Brother MFC-3420C Specifications

General

Brand	Brother
Model	MFC-3420C
Category	All in One Printer
Language	English