MAKING COPIES 10 - 3
Out of Memory message
If the memory becomes full while you are
making copies, the LCD message will
guide you through the next step.
If the
Out of Memory
message appears, press
Stop/Exit
to
cancel or
Mono Start
or
Colour Start
to copy scanned pages. You
will need to clear some jobs from the memory before you can
continue.
When you get an
Out of Memory
message, you may be able to
make copies if you first print incoming faxes in the memory to restore
the memory to 100%.
To gain extra memory, you can turn off Fax Storage.
(See Setting Fax Storage on page 8-2.)
—OR—
Print the faxes that are in the memory.
(See
Printing a fax from the memory
on page 5-6.)
Out of Memory
To Next Page
Loading...
Need help?
General
