Brother MFC-3420C - Fax Resolution

6 - 6 SETUP SEND
Fax Resolution
You can use the
Fax Resolution
key to change the setting
temporarily (for this fax only). In fax mode, press
Fax Resolution
and or to select the setting you want, and then press
Menu/Set
.
—OR—
You can change the default setting:
1
If it is not illuminated in green, press (
Fax
).
2
Load your document. (See Load documents on page 2-1.)
3
Press
Menu/Set
,
2
,
2
,
2
.
4
Press or to select the
resolution you want.
Press
Menu/Set
.
5
Press
1
if you want to choose more settings and the LCD will
return to the
Setup Send
menu.
—OR—
Press
2
if you have finished choosing settings.
6
Enter a fax number.
Press
Mono Start
or
Colour Start
.
Standard
Suitable for most typed documents.
Fine
Good for small print and transmits a little
slower than Standard resolution.
S.Fine
Good for small print or artwork and transmits
slower than Fine resolution.
Photo
Use when the document has varying shades
of gray or photograph. This has the slowest
transmission time.
2.Fax Resolution