SETUP SEND 6 - 7
Manual and automatic fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause
, and then press
Mono Start
or
Colour Start
to try
again. If you want to make a second call to the last number dialled,
you can save time by pressing
Redial/Pause
and
Mono Start
or
Colour Start
.
Redial/Pause
only works if you dialled from the control panel.
If you are sending a fax automatically and the line is busy, the
machine will automatically redial up to three times at five minutes
intervals.
Colour fax transmission
Your machine can send a colour fax to machines that support this
feature.
However, colour faxes cannot be stored in the memory, so Delayed
fax and Polling Transmit features are not available.
1
If it is not illuminated in green, press (
Fax
).
2
Load your document. (See
Load documents
on page 2-1
.)
3
Enter the fax number using the dial pad, Speed-Dial or Search.
4
Press
Colour Start
.
When you send a colour fax, the machine will send it in real time
(even if
Real Time TX
is set to
Off
).
You can not send multiple pages from the scanner glass.
To Next Page
Loading...
