ON-SCREEN PROGRAMMING 3 - 2
Navigation keys
You can access the menu mode by pressing
Menu/Set
.
When you enter the menu, the LCD scrolls.
Press
1
for General Setup menu
—OR—
Press
2
for Fax menu
—OR—
Press
3
for Copy menu
Press
0
for Initial Setup
You can scroll more quickly through each menu level by pressing the
arrow for the direction you want: or .
Then set an option by pressing
Menu/Set
when that option appears
on the LCD.
The LCD will then show the next menu level.
Press or to scroll to your next menu selection.
Press
Menu/Set
.
When you finish setting an option, the LCD shows
Accepted
.
*Access the menu
*Go to the next menu level
*Accept an option
*Scroll through the current
menu level
*Go back to the previous
menu level
*Exit the menu
Use to scroll backward if you passed your choices or want
to save keystrokes.
1.General Setup
2.Fax
3.Copy
....
0.Initial Setup
To Next Page
Loading...
