11 - 13 WALK-UP PHOTOCAPTURE CENTER
™
(MFC-3820CN ONLY)
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you’re using the PhotoCapture Center
™
, you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the machine will beep
to get your attention.
Media Error
—
This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
No File
—
This message will appear if you try to access the media
card in the drive (slot) does not contain a .JPG file.
Out of Memory
—
This message will appear if you are working with
images that are too large for the machine’s memory.
Unsupported Card
—
This message will appear if you insert a
media card that is not supported.
To Next Page
Loading...
Need help?
General
