SETUP SEND 6 - 19
Switching OFF TX Lock
1
When TX Lock is switched ON,
press
Menu/Set
.
2
Enter a 4-digit password and press
Menu/Set
.
The screen displays
Accepted
, then after 2 seconds the
display reverts to normal. TX Lock is now switched OFF.
If you forget the TX Lock password, please contact your Brother
dealer or Brother for assistance.
If the password you enter at Step 2 is incorrect, the screen
would display
Wrong Password
. After 2 seconds the display
will then return to displaying
TX Lock Mode
. You must then
start from Step 1 to switch OFF TX Lock.
Password:XXXX
To Next Page
Loading...
Need help?
General
