WALK-UP PHOTOCAPTURE CENTER
™
(MFC-3820CN ONLY) 11 - 12
■
White Balance
This setting adjusts the hue of the white areas of an image.
Lighting, Camera settings and other influences will effect the
appearance of white. The white areas of a picture may be slightly
pink, yellow or some other colour. By using this adjustment you
can correct this effect and bring the white areas back to pure
white.
■
Sharpness
This setting enhances the detail of an image. It is similar to
adjusting the fine focus on a camera. If the image is not in true
focus and you cannot see the fine details of the picture, then
adjust the sharpness.
■
Colour Density
This setting adjusts the total amount of colour in the image. You
can increase or decrease the amount of colour in an image to
improve a washed out or weak picture.
Cropping
If your photo is too long or wide to fit the available space on your
selected layout, part of the image will be automatically cropped.
The default setting is
On
. If you want to print whole image, turn this
setting to
Off
.
1
Press
Menu/Set
,
4
,
6
.
2
Press
or
to select
Off
(or
On
)
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
To Next Page
Loading...
Need help?
General
