QUICK-DIAL NUMBERS AND DIALLING OPTIONS 7 - 6
Pause
Press
Redial/Pause
to insert a 3.5-second pause between
numbers. If you are dialling overseas, you can press
Redial/Pause
as many times as needed to increase the length of the pause.
Fax Redial
If you’re sending a fax manually and the line is busy, press
Redial/Pause
to try again. Any time you want to make a second call
to the last number dialled, press
Redial/Pause
to save time.
If you’re sending a fax automatically and the line is busy, the machine
will automatically redial one time five minutes after the transmission.
Tone or Pulse (Not available in New Zealand)
If you have a Pulse dialling service, but need to send Tone signals
(for example, for telephone banking), follow the instructions below. If
you have Touch Tone service, you will not need this feature to send
tone signals.
1
Lift the handset of the external phone.
2
Press
#
on the control panel of your machine. Any digits dialled
after this will send tone signals.
3
When you hang up, the machine will return to the Pulse dialling
service.
To Next Page
Loading...
Need help?
General
