EasyManuals Logo

Brother MFC-495CW User Manual

Brother MFC-495CW
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
136
Copying Difficulties
Difficulty Suggestions
Cannot make a copy.
Make sure that the Copy key is illuminated.
(See Entering Copy mode on page 78.)
Poor copy results when using the
ADF.
Try using the scanner glass. (See Using the scanner glass on page 22.)
Vertical black lines or streaks
appear in copies.
Vertical black lines or streaks on copies are typically caused by dirt or correction
fluid on the scanner. Clean the glass strip and scanner glass and the white bar and
white plastic above them. (See Cleaning the scanner on page 154.)
Copies are blank. Make sure you are loading the document properly. (See Loading documents
on page 21.)
Fit to Page does not work properly. Make sure the document is not skewed on the scanner glass.
Reposition the document and try again.
Scanning Difficulties
Difficulty Suggestions
TWAIN/WIA errors appear when
starting to scan.
Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In
PaperPort
®
11SE with OCR, click File, Scan or Get Photo and click Select to
choose the Brother TWAIN/WIA driver.
Poor scanning results when using
the ADF.
Try using the scanner glass. (See Using the scanner glass on page 22.)
OCR does not work. Try increasing the scanner resolution.
Software Difficulties
Difficulty Suggestions
Cannot install software or print. Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Device Busy Make sure the machine is not showing an error message on the LCD.
Cannot print images from
FaceFilter Studio.
To use FaceFilter Studio, you must install the FaceFilter Studio application from
the CD-ROM supplied with your machine. To install FaceFilter Studio see the
Quick Setup Guide.
Also, before you start FaceFilter Studio for the first time, you must make sure your
Brother machine is turned On, and connected to your computer. This will allow you
to access all the functions of FaceFilter Studio.

Table of Contents

Other manuals for Brother MFC-495CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-495CW and is the answer not in the manual?

Brother MFC-495CW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)35 ppm
Print speed (color, normal quality, A4/US Letter)28 ppm
Digital senderNo
Number of print cartridges4
Total input capacity100 sheets
Total output capacity50 sheets
Mac compatibilityYes
Dimensions (WxDxH)391 x 376 x 180 mm
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Package weight (imperial)22.9 lbs
Color all-in-one functionscopy, fax, print, scan
Compatible operating systemsWindows/Mac OS
Package dimensions (W x D x H)18.3 x 10 x 18.1 \
DisplayTFT
Display diagonal3.3 \
Market positioningHome & office
Supported network protocols (IPv4)ARP, RARP, BOOTP, APIPA, NetBIOS/WINS, LPR/LPD, Raw Port/Port9100, DNS, mDNS, FTP, SNMPv1, TFTP, LLTD
FaxingColor faxing
Fax memory480 pages
Fax speed dialing (max numbers)33600 b/s
Copier resize25 - 400 %
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
Image formats supportedBMP, PCX, PNG
Sustainability certificatesENERGY STAR
Paper tray media typesPlain paper
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4
Power consumption (average operating)- W

Related product manuals