EasyManuals Logo

Brother MFC-495CW User Manual

Brother MFC-495CW
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
Sending a Fax
37
5
Dual Access
(Black & White only) 5
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message appears
while scanning a document, press
Stop/Exit to cancel or Black Start to send
the scanned pages.
Real Time Transmission 5
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can
turn on Real Time TX.
a Press (Fax).
b Press a or b to choose Real Time TX.
c Press d or c to choose On (or Off).
Press OK.
Note
If the memory is full and you are sending a
black & white fax from the ADF, the
machine will send the document in real time
(even if
Real Time TX
is set to
Off
).
Faxes from the scanner glass cannot be
sent until you clear some of the memory.
In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
Overseas Mode 5
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a Press (Fax).
b Load your document.
c Press a or b to choose
Overseas Mode.
d Press d or c to choose On (or Off).
Press OK.
Delayed Faxing
(Black & White only) 5
During the day you can store up to 50 faxes
in the memory to be sent within 24-hours.
These faxes will be sent at the time of day you
enter in step e.
a Press (Fax).
b Load your document.
c Press a or b to choose Delayed Fax.
d Press d or c to choose On.
Press OK.
e Enter the time you want the fax to be
sent (in 24-hour format).
(For example, enter 19:45 for 7:45 PM.)
Press OK.
Note
The number of pages you can scan into
the memory depends on the amount of
data that is printed on each page.

Table of Contents

Other manuals for Brother MFC-495CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-495CW and is the answer not in the manual?

Brother MFC-495CW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)35 ppm
Print speed (color, normal quality, A4/US Letter)28 ppm
Digital senderNo
Number of print cartridges4
Total input capacity100 sheets
Total output capacity50 sheets
Mac compatibilityYes
Dimensions (WxDxH)391 x 376 x 180 mm
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Package weight (imperial)22.9 lbs
Color all-in-one functionscopy, fax, print, scan
Compatible operating systemsWindows/Mac OS
Package dimensions (W x D x H)18.3 x 10 x 18.1 \
DisplayTFT
Display diagonal3.3 \
Market positioningHome & office
Supported network protocols (IPv4)ARP, RARP, BOOTP, APIPA, NetBIOS/WINS, LPR/LPD, Raw Port/Port9100, DNS, mDNS, FTP, SNMPv1, TFTP, LLTD
FaxingColor faxing
Fax memory480 pages
Fax speed dialing (max numbers)33600 b/s
Copier resize25 - 400 %
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
Image formats supportedBMP, PCX, PNG
Sustainability certificatesENERGY STAR
Paper tray media typesPlain paper
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4
Power consumption (average operating)- W

Related product manuals