EasyManuals Logo

Brother MFC-495CW User Manual

Brother MFC-495CW
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Sending a Fax
39
5
Restoring all settings to the
factory settings 5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Press (Fax).
b Press a or b to choose
Factory Reset.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
Sending a fax manually 5
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
Note
To send a multiple page fax, use the ADF.
a Press (Fax).
b Load your document.
c To listen for a dial tone press Hook or
pick up the handset of the external
telephone.
d Dial the fax number.
e When you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass
press 1 to send a fax.
f If you picked up the handset of an
external telephone, replace it.
Sending a fax at the end of a
conversation 5
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b Press (Fax).
c Load your document.
d Press Black Start or Color Start.
If you are using the scanner glass,
press 1 to send a fax.
e Replace the handset of the external
phone.
Out of Memory message 5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Black Start or
Color Start to send the pages scanned so
far, or to press Stop/Exit to cancel the
operation.
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real Time Transmission on page 37.)

Table of Contents

Other manuals for Brother MFC-495CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-495CW and is the answer not in the manual?

Brother MFC-495CW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)35 ppm
Print speed (color, normal quality, A4/US Letter)28 ppm
Digital senderNo
Number of print cartridges4
Total input capacity100 sheets
Total output capacity50 sheets
Mac compatibilityYes
Dimensions (WxDxH)391 x 376 x 180 mm
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Package weight (imperial)22.9 lbs
Color all-in-one functionscopy, fax, print, scan
Compatible operating systemsWindows/Mac OS
Package dimensions (W x D x H)18.3 x 10 x 18.1 \
DisplayTFT
Display diagonal3.3 \
Market positioningHome & office
Supported network protocols (IPv4)ARP, RARP, BOOTP, APIPA, NetBIOS/WINS, LPR/LPD, Raw Port/Port9100, DNS, mDNS, FTP, SNMPv1, TFTP, LLTD
FaxingColor faxing
Fax memory480 pages
Fax speed dialing (max numbers)33600 b/s
Copier resize25 - 400 %
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
Image formats supportedBMP, PCX, PNG
Sustainability certificatesENERGY STAR
Paper tray media typesPlain paper
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4
Power consumption (average operating)- W

Related product manuals