EasyManuals Logo

Brother MFC-495CW User Manual

Brother MFC-495CW
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
Chapter 6
50
Remote Retrieval 6
You can call your machine from any touch
tone telephone or fax machine, then use the
remote access code and remote commands
to retrieve fax messages.
Setting a Remote Access
Code 6
The remote access code lets you access the
remote retrieval features when you are away
from your machine. Before you can use the
remote access and retrieval features, you
have to set up your own code. The factory
default code is inactive code (--- ).
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remote Access.
d Enter a three-digit code using numbers
0-9, l, or #.
Press OK. (The preset ’ cannot be
changed.)
Note
Do not use the same code as your Fax
Receive Code (l 5 1) or Telephone
Answer Code (# 5 1). (See Using external
and extension telephones on page 62.)
e Press Stop/Exit.
Note
You can change your code at any time by
entering a new one. If you want to make
your code inactive, press Clear/Back in
step d to restore the inactive setting (--- )
and press OK.
Using your Remote Access
Code 6
a Dial your fax number from a touch tone
telephone or another fax machine.
b When your machine answers, enter
your remote access code (3 digits
followed by ) at once.
c The machine signals if it has received
messages:
1 long beep — Fax messages
No beeps — No messages
d When the machine gives two short
beeps, enter a command.
The machine will hang up if you wait
longer than 30 seconds to enter a
command.
The machine will beep three times if you
enter an invalid command.
e Press 9 0 to stop Remote Access when
you have finished.
f Hang up.
Note
If your machine is set to Manual mode
and you want to use the remote retrieval
features, wait for about 100 seconds after
it starts ringing, and then enter the remote
access code within 30 seconds.

Table of Contents

Other manuals for Brother MFC-495CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-495CW and is the answer not in the manual?

Brother MFC-495CW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)35 ppm
Print speed (color, normal quality, A4/US Letter)28 ppm
Digital senderNo
Number of print cartridges4
Total input capacity100 sheets
Total output capacity50 sheets
Mac compatibilityYes
Dimensions (WxDxH)391 x 376 x 180 mm
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Package weight (imperial)22.9 lbs
Color all-in-one functionscopy, fax, print, scan
Compatible operating systemsWindows/Mac OS
Package dimensions (W x D x H)18.3 x 10 x 18.1 \
DisplayTFT
Display diagonal3.3 \
Market positioningHome & office
Supported network protocols (IPv4)ARP, RARP, BOOTP, APIPA, NetBIOS/WINS, LPR/LPD, Raw Port/Port9100, DNS, mDNS, FTP, SNMPv1, TFTP, LLTD
FaxingColor faxing
Fax memory480 pages
Fax speed dialing (max numbers)33600 b/s
Copier resize25 - 400 %
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
Image formats supportedBMP, PCX, PNG
Sustainability certificatesENERGY STAR
Paper tray media typesPlain paper
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4
Power consumption (average operating)- W

Related product manuals