Sending a fax
25
Polling overview 3
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polled transmit 3
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
Setup for polled transmit 3
a Make sure you are in FAX mode .
b Load your document.
c Press Menu, 2, 2, 6.
22.Setup Send
6.Polled TX
a On
b Off
Select ab or OK
d Press a or b to choose On (or Off).
Press OK.
e Press 2 to choose 2.No if you do not
want to enter more settings when the
LCD asks you the following message:
22.Setup Send
Other Settings?
a 1.Yes
b 2.No
Select ab or OK
f Press Start.
g If you are using the scanner glass, the
LCD will prompt you to choose one of
the options below:
Flatbed Fax:
Next Page?
a 1.Yes
b 2.No (Send)
Select ab or OK
Press 1 to send another page.
Go to step h.
Press 2 or Start if you are finished
scanning pages.
h Place the next page on the scanner
glass, press OK. Repeat
steps g and h for each additional
page.
The document will be stored in memory
and wait to be polled.
The document will be stored and can be
retrieved from any other fax machine until
you delete the fax from memory.
To delete the fax from memory, press
Menu, 2, 7. (See Checking and canceling
waiting jobs uu page 22.)
To Next Page
Loading...
Need help?
General
