70
Checking the Page Counters A
You can see the machine’s Page Counters
for copies, printed pages, reports and lists,
faxes or a summary total.
a Press Menu, 8, 2.
82.Page Counter
a Total :XXXXXX
b Fax/List :XXXXXX
b Press a or b to see Total, Fax/List,
Copy or Print.
c Press Stop/Exit.
Checking the remaining life of
parts A
You can see the machine’s parts life on the
LCD.
a Press Menu, 8, 3.
83.Parts Life
1.Drum
2.Fuser
3.Laser
Select ab or OK
b Press a or b to choose 1.Drum,
2.Fuser, 3.Laser, 4.PF Kit MP,
5.PF Kit 1 or 6.PF Kit 2
1
.
Press OK.
c Press Stop/Exit.
1
If the optional lower tray is installed on
MFC-8710DW or MFC-8910DW.
The life check will be accurate only if you
have reset the part counter when you
installed a new part. It will not be accurate
if that part’s life counter was reset during
the life of the used part.
The remaining life of the toner cartridge is
listed on the User Settings report. (See
How to print a report uu page 47.)
Replacing periodic
maintenance parts A
The periodic maintenance parts will need to
be replaced regularly to maintain the print
quality. The parts listed below will have to be
replaced after printing approximately 50,000
pages
1
for PF Kit MP and 100,000 pages
1
for PF Kit 1, PF Kit 2, Fuser and Laser.
Please call Brother Customer Service when
the following messages appear on the LCD.
1
Letter or A4 size single-sided pages.
2
If the optional lower tray is installed on
MFC-8710DW or MFC-8910DW.
LCD message Description
Replace Parts
Fuser Unit
Replace the fuser unit.
Replace Parts
Laser Unit
Replace the laser unit.
Replace Parts
PF Kit 1
Replace the paper feeding
kit for the paper tray.
Replace Parts
PF Kit 2
2
Replace the paper feeding
kit for the lower tray (option).
Replace Parts
PF Kit MP
Replace the paper feeding
kit for the multi-purpose
tray.
To Next Page
Loading...
Need help?
General
