Routine maintenance
71
Packing and shipping
the machine A
This machine is heavy and weighs more
than 34.8 lb (15.8 kg). To prevent possible
injuries at least two people should lift the
machine (except MFC-8510DN). Be careful
not to pinch your fingers when you put the
machine down.
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray as you may
be injured or cause damage to the machine
because it is not attached to the Lower
Tray.
• If for any reason you must ship your
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
• If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts, including the drum unit, the toner
cartridge, and printed materials to use with
your ‘Exchange’ machine.
a Turn off the machine’s power switch.
Leave the machine turned off for at least
10 minutes to cool down.
b Disconnect all the cables, and then
unplug the power cord from the AC
power outlet.
c Put the packing material (1) into the
carton.
To Next Page
Loading...
Need help?
General
