Brother MFC-8690DW - Wired Enable (MFC-8690 DW and MFC-8890 DW Wired Network Only); WLAN Enable (MFC-8690 DW and MFC-8890 DW Wireless Network Only)

Control panel setup
105
6
Wired Enable (MFC-8690DW and MFC-8890DW wired network only) 6
If you want to use the wired network connection, set Wired Enable to On.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose Wired LAN.
Press OK.
d Press a or b to choose Wired Enable.
Press OK.
e Press a or b to choose On or Off.
Press OK.
f Press Stop/Exit.
WLAN Enable (MFC-8690DW and MFC-8890DW wireless network only) 6
If you want to use the wireless network connection, set WLAN Enable to On.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose WLAN.
Press OK.
d Press a or b to choose WLAN Enable.
Press OK.
e Press a or b to choose On or Off.
Press OK.
f Press Stop/Exit.