Control panel setup
106
6
E-mail / IFAX (MFC-8690DW, MFC-8880DN and MFC-8890DW only) 6
This menu has five selections: Mail Address, Setup Server, Setup Mail RX, Setup Mail TX and
Setup Relay. As this section requires you to enter a lot of text characters, you may find that it is more
convenient to use Web Based Management and your favorite web browser to configure these settings. (see
Web Based Management on page 141) These settings must be configured for the IFAX feature to work. (For
more details about Internet fax, see Internet fax and Scan to E-mail (E-mail server) (For MFC-8690DW,
MFC-8880DN and MFC-8890DW) on page 154.)
You can also access the character you want by repeatedly pressing the appropriate number key using the
machine’s control panel. (For more information, see Entering Text on page 225.)
Mail Address 6
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Mail Address.
Press OK.
e Press 1 to change. Enter the mail address. (up to 60 characters)
Press OK.
f Press Stop/Exit.
Setup Server 6
SMTP Server
This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your
network.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Server.
Press OK.
e Press a or b to choose SMTP Server.
Press OK.
To Next Page
Loading...
Need help?
General
