Brother MFC-8690DW - How to Set a New Default for Scan to E-Mail (E-Mail Server) (MFC-8690 DW, MFC-8880 DN and MFC-8890 DW Only)

Control panel setup
117
6
How to set a new default for Scan to E-mail (E-mail server)
(MFC-8690DW, MFC-8880DN and MFC-8890DW only) 6
You can choose the default color file type for the Scan to E-mail (E-mail server) function. (For the details on
how to operate Scan to E-mail (E-mail server), see Internet fax and Scan to E-mail (E-mail server) (For
MFC-8690DW, MFC-8880DN and MFC-8890DW) on page 154.)
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose Scan to E-mail.
Press OK.
d Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi, Gray 300 dpi, B&W 200 dpi or B&W 200x100 dpi.
Press OK.
e If you chose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi or Gray 300 dpi in step d, press a or b to choose PDF,
Secure PDF, JPEG or XPS.
If you chose B&W 200 dpi or B&W 200x100 dpi in step d, press a or b to choose PDF, Secure PDF
or TIFF.
Press OK.
f Press Stop/Exit.