Configuring your machine for a wireless network (For MFC-8690DW and MFC-8890DW)
26
3
For Ad-hoc mode 3
a Confirm your network environment. See page 27.
b Confirm your wireless network setup method. See page 28.
c Configure your machine for a wireless network. See page 31.
Wireless configuration and installing drivers and software have been completed.
Ad-hoc mode
Connected to a wireless capable computer
without an access point
or
Infrastructure mode See page 25
Connected to a computer with an access point
Using the Setup Wizard from the control panel
(Recommended)
Using the Brother installer
application
See page 31
(Windows
®
) See page 56
(Macintosh) See page 83
Installing drivers and software (See the Quick Setup Guide)
To Next Page
Loading...
