24
3
14
Enter the password and press OK. Go to step 15.
15
The following will be displayed. To apply the wireless settings, select 1. Yes and press OK. To cancel,
select 2. No.
If you select 1.Yes, go to step 16.
If you select 2. No, go to step 2.
16
The machine starts to connect the wireless device you have selected.
17
If you connect to the wireless network is connected successfully, the display shows Connected for 2
seconds and configuration is completed.
If the connection fails, the display will shows Connection Error for 2 seconds. See Wireless network
troubleshooting on page 138.
22.Setup WLAN
PASS:
Enter & OK
22.Setup WLAN
Apply Settings?
▲ 1.Yes
▼ 2.No
Select ▲ ▼ & OK
22.Setup WLAN
Connecting WLAN
22.Setup WLAN
Connected
To Next Page
Loading...
