3-66
Confidential
(5) Fold the Second side CIS flat cable at the position 208 mm away from the Second side
CIS unit side.
Fig. 3-70
(6) Align the Second side CIS flat cable to the angle of the Rib of the Flat cable holder ASSY
and pass it through the Flat cable holder ASSY as shown in the figure below, and then
affix it to the double-sided adhesive tape affixed to the Flat cable holder ASSY.
Fig. 3-71
208±2 mm
Fold up FFC along with the dotted line
Supporting tape
Supporting plate
Second side CIS flat cable
Pass the harness through here.
Second side CIS flat cable
Affix it to the double-sided
Rib (Align the folded area to this part.)
Second side
Flat cable holder ASSY
Flat cable holder ASSY
CIS flat cable
adhesive tape
<CIS side>
To Next Page
Loading...
