Brother MFC-9130CW Service Manual

5-18
Confidential
1.4.8 Operational check of control panel key (Function code 13)
<Function>
This function allows you to check if the keys on the control panel work normally.
<Operating procedure>
(1) Press the 1 and 3 keys in this order in the initial state of the maintenance mode.
"00" is displayed on the LCD.
(2) Press the keys in the order designated in the figure shown below. The LCD shows the
corresponding number in decimal notation each time a key is pressed.
Check that the displayed number is correct by referring to the figure below. If the keys are
pressed in the incorrect order, the machine displays the "INVALID OPERATE" on the LCD.
Press the Stop key, and then press the correct keys.
(3) After the last number key is pressed, the machine returns to the initial state of the
maintenance mode.
To cancel this operation and return the machine to the initial state of the maintenance
mode during the above procedure, press the Stop key.
Fig. 5-8

Brother MFC-9130CW Specifications

Printing

print speed black	up to 19 ppm
print speed color	up to 19 ppm
print resolution	up to 600 x 2400 dpi
print technology	Digital Color LED

Copying

copy speed black	up to 19 cpm
copy speed color	up to 19 cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11.7”
scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi

Faxing

fax modem	33.6 kbps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
large paper capacity	250-sheet capacity paper tray

Display

lcd display type/size	3.7” Color TouchScreen
touchscreen display size	3.7 inches

Memory

standard memory	192MB
maximum memory	192MB