Brother MFC-9130CW - Page 264

3-101
Confidential
(4) Remove the four Taptite cup B 3x10 screws to remove the Panel control PCB shield plate
cover from the Panel control PCB ASSY.
Fig. 3-135
(5) Release the Lock to disconnect the Flat cable from the Connector (CN4) of the Panel
control PCB ASSY.
Fig. 3-136
Control panel ASSY
Panel control PCB ASSY
Taptite cup B 3x10
Taptite cup B 3x10
Panel control PCB
shield plate cover
Flat cable
Panel control PCB ASSY
CN4
Lock
Lock