Brother MFC-9130CW Service Manual

5-37
Confidential
1.4.19 Motor reset (Function code 57)
<Function>
If the manufacturer of the machine's motors is unidentified, identification operation is
performed before a warm-up. After the operation is completed, a warm-up is performed.
If the combination of main PCB and/or motors is changed, the motor identification result needs
to be reset. This function allows you to reset the motor identification result.
<Operating procedure>
(1) Press the 5 and 7 keys in this order in the initial state of the maintenance mode.
"RESET MOTOR" is displayed on the LCD.
(2) When you press the Mono Start key, the motor identification result is reset and "PLZ
POWER OFF/ON" is displayed on the LCD.
(3) Turn OFF the power switch of the machine.
Note:
When the power is turned OFF and ON again after the motor identification result is reset,
a motor identification operation is performed.

Brother MFC-9130CW Specifications

Printing

print speed black	up to 19 ppm
print speed color	up to 19 ppm
print resolution	up to 600 x 2400 dpi
print technology	Digital Color LED

Copying

copy speed black	up to 19 cpm
copy speed color	up to 19 cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11.7”
scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi

Faxing

fax modem	33.6 kbps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
large paper capacity	250-sheet capacity paper tray

Display

lcd display type/size	3.7” Color TouchScreen
touchscreen display size	3.7 inches

Memory

standard memory	192MB
maximum memory	192MB