EasyManuals Logo

Brother MFC-9330CDW Network User's Guide

Brother MFC-9330CDW
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Configuring your machine for a wireless network (For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
24
3
NOTE
If you configure your machine using EAP-TLS Authentication, you must install the Client Certificate issued
by a CA before you start configuration. Contact your network administrator about the Client Certificate. If
you have installed more than one certificate, we recommend you write down the certificate name you want
to use. For installing the certificate, see Using Certificates for device security on page 84.
If you verify your machine using the Common Name of the Server Certificate, we recommend you write
down the Common Name before you start configuration. Contact your network administrator about the
Common Name of the Server Certificate.
b Press .
c Press Network.
d Press WLAN.
e Swipe up or down, or press a or b to display Setup Wizard.
Press Setup Wizard.
f When Enable WLAN? is displayed, press Yes to accept.
This will start the wireless setup wizard.
To cancel, press No.
g The machine will search for your network and display a list of available SSIDs.
You should see the SSID you wrote down earlier. If the machine finds more than one network, swipe up
or down, or press a or b to choose your network. Go to step k. Press OK.
If your access point is set to not broadcast the SSID, you will have to add the SSID name manually. Go
to step h.
h Swipe up or down, or press a or b to choose <New SSID>. Press OK.
Go to step i.
i Enter the SSID name. (For information on how to enter text: see Quick Setup Guide.)
Press OK. Go to step j.
j Choose Infrastructure when instructed.
k Choose the Authentication method using a or b.
Do one of the following:
If you chose LEAP, go to step q.
If you chose EAP-FAST, go to step l.
If you chose PEAP, go to step l.
If you chose EAP-TTLS, go to step l.
If you chose EAP-TLS, go to step m.

Table of Contents

Other manuals for Brother MFC-9330CDW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-9330CDW and is the answer not in the manual?

Brother MFC-9330CDW Specifications

Print Specifications IconPrint Specifications
print speed blackup to 23 ppm
print speed colorup to 23 ppm
print resolutionup to 600 x 2400 dpi
Copy Specifications IconCopy Specifications
copy speed blackup to 23 cpm
copy speed colorup to 23 cpm
copy resolution600 x 600 dpi
Scan Specifications IconScan Specifications
scan resolution optical1200 x 2400 dpi
scan resolution interpolated19200 x 19200 dpi
document glass size8.5” x 11.7”
Fax Specifications IconFax Specifications
fax modem speed33.6k bps
fax page memoryup to 500 pages
speed dial locations200
Paper Handling IconPaper Handling
auto document feeder capacityup to 35 pages
paper size maximumup to 8.5” x 14” (legal)
standard paper capacity250 sheets
Power and Energy IconPower and Energy
deep sleep mode power consumption<2W
automatic duplex printingYes
energy star qualifiedYes

Related product manuals