Brother MFC-9330CDW Network User's Guide

Configuring your machine for a wireless network (For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
30
3
a Press .
b Press Network.
c Press WLAN.
d Swipe up or down, or press a or b to display WPS w/PIN Code.
Press WPS w/PIN Code.
e When Enable WLAN? is displayed, press Yes to accept.
This will start the wireless setup wizard.
To cancel, press No.
f The Touchscreen will show an 8 digit PIN and the machine starts searching for an access point.
g Using a computer that is on the network, type “vaccess point’s IP address/” into your browser.
(Where “access point’s IP address” is the IP address of the device that is used as the Registrar
1
.) Go to
the WPS setting page and input the PIN which the Touchscreen shows in f to the Registrar. Follow the
on-screen instructions.
1
The Registrar is normally the WLAN access point / router.
NOTE
The setting page is different, depending on the brand of access point / router. See the instruction manual
supplied with your access point / router.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes