Brother MFC-9330CDW Network User's Guide

Web Based Management
65
5
 Auth. Method
Choose the authentication method required for access to the CIFS server Auto, Kerberos
1
, or
NTLMv2
2
.
1
Kerberos is an authentication protocol which allows devices or individuals to securely prove their identity to network servers using a
single sign-on.
2
NTLMv2 is the authentication method used by Windows to log into servers.
• Auto: If you choose Auto, the machine will initially search for a Kerberos server. If the Kerberos
server is not detected, NTLMv2 will be used for the authentication method.
• Kerberos: Choose Kerberos to use Kerberos Authentication only.
• NTLMv2: Choose NTLMv2 to use NTLMv2 Authentication only.
For Kerberos and NTLMv2 Authentication, you must also configure the Date&Time settings or
the SNTP protocol (network time server).
For configuring the Date&Time and the SNTP settings, see Synchronize with SNTP server
on page 62.
You can also configure the Date&Time settings from the machine’s control panel. See Quick
Setup Guide.
 Username
Enter the Username for the authentication (up to 96 characters).
NOTE
If the username is part of a domain, please input the username in one of the following styles: user@domain
or domain\user.
 Password
Enter the password for the authentication (up to 32 characters).
 Kerberos Server Address (if needed)
Enter the KDC Host Address (for example: mypc.example.com) (up to 64 characters) or the IP
address (for example: 192.168.56.189).
 Error Detection Setting (See Error Detection Setting on page 66.)
d In the Connection Status, you can confirm the last log status. For more information, see Understanding
Error Messages on page 67.
e Click Submit to display the Test Print Log to Network page.
To test your settings, click Yes and go to step f.
To skip the test, click No. Your settings will be submitted automatically.
f The machine will test your settings.
g If your settings are accepted, Test OK appears on the page.
If Test Error appears, check all settings, and then click Submit to display the Test page again.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes