Brother MFC-9420CN - For Mac os 9.1 to 9.2; For Mac os X 10.2.4 or Greater

31
Make sure that you have completed the instructions from Step 1 “Setting Up
the machine” on pages 4 - 11.
1
Disconnect the machine from the power
socket and from the Macintosh
®
.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the printer and scanner drivers. If the
language screen appears, select your
language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and
restart your Macintosh
®
.
7
After the DeviceSelector window appears,
connect the network interface cable to the
machine, and then connect it to a free port
on your hub.
For Mac OS
®
X 10.2.4 or greater
The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine
before restarting your
Macintosh
®
or if you are overwriting a
previously installed version of the Brother
software. If you encounter this problem
continue with the installation skipping steps 9
to 11. You should then select your Brother
machine from the Model pull-down list in the
main screen of ControlCenter2. (You can also
see the Software User’s Guide for details on
selecting which machine ControlCenter2 will
connect with.)
Continued ...
Installing the Drivers & Software
Setting Up
the machine
Macintosh
®
Network
For
Network Users