20
Make sure that you have completed the instructions from Step 1 “Setting Up
the machine” on pages 4 - 11.
1
Disconnect the machine from the power
socket.
2
Turn on your computer.
You must be logged on with Administrator
rights.
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine.
3
Connect the parallel interface cable to your
computer, and then connect it to the
machine.
4
Plug in the power cord and turn on the
machine.
5
Insert the supplied CD-ROM for Windows
®
into your CD-ROM drive. If the language
screen appears, select your language.
6
The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
7
After reading and accepting the ScanSoft
®
PaperPort
®
9.0SE License Agreement, click
Yes.
For Windows NT
®
Workstation Version 4.0 Users
Please close any applications running before
installing the MFL-Pro Suite.
Brother recommends that you connect the
machine directly to your computer.
If this window does not appear, use Windows
®
Explorer to run the setup.exe program from
the root directory of the Brother CD-ROM.
Step 2
Installing the Drivers & Software
To Next Page
Loading...
