Brother MFC-9420CN - Load Paper in the Paper Tray

7
Setting Up
the machine
Windows
®
USB
Windows
®
Parallel
Windows
NT
®
4.0
Parallel
Macintosh
®
USB
Macintosh
®
Network
Windows
®
Network
For
Network Users
1
Pull the paper tray completely out of the
machine.
2
While pressing the paper guide release
lever, slide the adjusters to fit the paper
size.
Check that the guides are firmly in the slots.
3
Fan the stack of paper well to avoid paper
jams and misfeeds.
4
Put the paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark.
5
Put the paper tray firmly back in the
machine.
4
Load Paper in the Paper
Tray
Paper guide
Paper guide
For details on supported paper
specifications, see “Acceptable paper and
other media” in Chapter 2 of the User’s
Guide.
Maximum paper mark
Output paper tray
support flap