Wireless Configuration for Macintosh
®
60
5
h For configuration, it is recommended that you temporarily connect your Brother wireless device directly
to a free port on your access point, hub or router using a network cable.
If you can temporarily connect with a network cable:
Choose I’m able to temporarily connect my device to my access point with a network cable
and then click Next.
Go to f.
If you do not have a network cable or cannot temporarily connect the Brother wireless device to your
access point:
Choose I’m not able to connect my device to my access point with a network cable and then
click Next.
Go to j.
i Connect the Brother wireless device to your access point using a network cable and click Next. Go to m
To Next Page
Loading...
