5-71
Confidential
*1: Not required for servicing.
*2: The serial number of the machine can be changed with the following procedure.
1) While the serial number is displayed, press the 9, 4, 7 and 5 keys in this order. The
uppermost digit of the current serial number starts blinking, indicating that the
machine switches to the edit mode.
2) Enter the uppermost digit of the desired serial number with numerical keys. Press
the
â–º key to move the cursor to the second digit. In the same way, enter the
remaining 14 digits.
Entry of alphabet letters
To enter an alphabet letter, press the corresponding numerical key repeatedly until
the target alphabet letter appears.
3)
Press the SET key to save the serial number and press the X key to return the
machine to the initial stage of the maintenance mode.
*3: With the purge count or flushing count displayed, press the 2, 7, 8 and 3 keys in this order
to reset the count.
Note: Even if you reset the purge count, it will not become 0, since the ink in the
intermediate absorber box is taken into consideration.
*4: Resetting shown below are out of target.
Maintenance mode 01, 91
Purge count and flushing count at maintenance mode 80.
*5: Not used.
*6: for Regular Ink cartridge model
*7: for Ink tank model
*8: for Simple Ink cartridge model
*9: See *8 for Maintenance 77.
Numerical keys Letters supported
22 → A → B → C
33 → D → E → F
44 → G → H → I
55 → J → K → L
66 → M → N → O
77 → P → Q → R → S
88 → T → U → V
99 → W → X → Y → Z
To Next Page
Loading...
Need help?
General
Weight and Dimensions
